IR Fan

This guide explains how to set up a IR Fan using the Loft App.

⚠️ Note: To set up a IR Fan, the device must already be installed. If don't know how to install a device so click here.

---

Steps to Setup IR Fan

1. Open the Loft App

   • Navigate to the Rooms section.

2. Select a Room

   • Tap on the room where your IR Fan is installed.

3. Locate the Device

   • Find the IR Fan you want to set up.
   • Devices pending setup are marked with a red dot.

4. Complete Setup

   • Tap on the device to complete the setup.

5. Select Your Device
   Two device options will appear:
   • AC Remote
   • Fan Remote
   • Tap on "Fan Remote"
   • Two tabs will appear: Default and Others.

Default Tab

Watch The Video Tutorial

• Supported Fan brand list appears.
• Tap on your brand.
• If verified, the Fan Remote Interface will appear.
• If your compatible brand is not listed under Default, go to Others.

Others Tab

Watch The Video Tutorial

• A Wi-Fi network input screen appears.
• Enter:
  • SSID (your Wi-Fi network name)
  • Password (Wi-Fi password)
• Tap Send.

• An extended AC brands/protocol list may appear.
• Select your Compatible Brand from list.

• After that Select Remote
• Then click to Continue

• If no protocols are available, you may need additional devices such as a Global Cache IR Learner.
• For more details on how to setup Global Cache click here.

---

Setup Completed

• Once configured using either method, your IR Fan remote interface will appear.
• You can now control your Fan via the Loft App.

---

Notes

• Ensure your Wired IR device is installed and powered on before starting setup.