Skip to main content

RGB

This guide explains how to set up an RGB light using the Loft App.

⚠️ Keep in mind: To set up an RGB light, the device must already be installed. If don't know how to install a device so click here.

Watch The Video Tutorial​

Steps to Setup RGB Light​

  1. Open the Loft App

    • Navigate to the Rooms section.

  2. Select a Room

    • Tap on the room where your RGB light is installed.

RGB image

  1. Locate the Device

    • Find the RGB light you want to set up.
    • Devices pending setup are marked with a red dot.

  2. Start Setup

    • Tap on the device to open the Blink from the Device setup screen.

RGB image

  1. Identify the Light by Blinking
    • By default, the light will blink 10 times.
    • Use the “-” and “+” buttons to adjust the blink count.
    • Tap Retry to make the RGB light blink again until you can identify it.
    • Once confirmed, tap Continue.

RGB image

  1. Change Device Name
    • The Change Name screen will appear.
    • Enter a custom name for your RGB light or keep the default name.
    • Tap Save Changes to proceed.

RGB image

  1. Setup Completed
    • Your RGB light is now successfully set up and ready to use.

RGB image

Notes​

  • Ensure your RGB light is powered on during setup.
  • Device names can be updated later from the Device Settings menu.