Input Mode

This guide explains how to setup Input Mode in Retro Panel using the Loft App.

⚠️ Note: To set up a Input Mode, ensure that Retro Panel is properly configured in the Loft App.

---

Watch The Video Tutorial

Steps to Setup Input Mode

1. Open the Loft App

   • Navigate to the Rooms section.

2. Select a Room

   • Tap on the room from where you want to setup Input Mode.

3. Locate the Device
   • Find the Retro Panel Device, Tap it to proceed setup.

4. Retro Panel Interface
   • Locate the Switch you want to setup.
   • Tap on “Timer Icon”
   • Switch Settings popup menu appears.
   • Tap on Input Mode.

5. Set Mode
   • Switch Mode screen appears.
   • By default mode is set to Normal.
   • You can change the mode from the following options according to your preferences.
   • 1. Normal: Works like a regular switch. When the switch is ON, the device turns ON, When it's OFF, the device turns OFF.
   • 2. Toggle State: The device changes it's state each time the switch changes position, regardless of ON or OFF.
   • 3. Momentary Switch: The device activates only while the switch is being pressed. It's useful for temporary control like a doorbell.
   • After selecting the Mode, Tap on Save.